PRODUCT DELIVERY, STORAGE AND HANDLING
All equipment shall be boxed, crated or otherwise enclosed and protected during shipment, handling, storage and after installation until final acceptance of the equipment. Electrical materials shall be delivered in manufacturer's original cartons or containers with seals intact as applicable. Large multicomponent assemblies shall be delivered in sections that facilitate field handling and installation.
Unless designed for outdoor use, all equipment shall be kept dry, off the ground and covered from exposure to weather. Pumps, motors, electrical equipment and equipment having anti-friction or sleeve bearings shall be stored in weather tight storage facilities. Heaters in equipment shall be connected and operated until the equipment is placed in operation. The Contractor shall prevent corrosion, contamination or deterioration of stored equipment.
Equipment and materials shall be handled in accordance with manufacturer's recommendations. Large or heavy items shall only be lifted by the designated points. Padded slings and hooks shall be used for lifting to prevent damage.
All equipment shall be protected until final acceptance and all factory surfaces must be protected from impact, abrasion, discolouration and other damage. All damaged equipment must be repaired or replaced before final acceptance.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment